Ver Blooming Gel
$7.00Achieve salon-quality marble, watercolor, smoke, and floral nail art at home or in the salon. VER Blooming Gel disperses any regular colored gel polish into fluid patterns before curing, making complex nail art effortless for both beginners and professional nail technicians.
Key Features:
Clear Dispersing Formula: Compatible with all UV/LED gel polish brands and base coats.
Self-Leveling & Smooth: Prevents clumping or uneven ridges on natural or acrylic nails.
Quick Spread Action: Seamlessly expands pigments into organic, gradient, and marble patterns within seconds.
Long-Lasting Wear: Chip-resistant and salon-grade durability lasting up to 3–4 weeks.
Ver Crystal Top Coat
$7.00Seal in vibrant color and nail art with the ultra-reflective, mirror-like finish of VER Crystal Top Coat. Formulated for high-traffic nail salons and at-home artists across Lebanon, this advanced no-wipe formula delivers a diamond-hard, glass-like shine that resists scratches, dullness, and chipping for over 4 weeks.
Key Features:
No-Wipe / Non-Sticky Finish: Cures completely dry without an inhibition layer—no alcohol or cleanser wipes required.
Diamond Scratch Resistance: High-durability polymer matrix protects color against daily scuffs, household detergents, and friction.
Anti-Yellowing UV Shield: Built-in optical UV blockers prevent yellowing, discoloration, or fading on white, French, pastel, and clear builder gel manicures.
Smooth Self-Leveling Viscosity: Glides effortlessly without pooling into the cuticles or leaving brush streaks.
How to Use:
Complete your gel polish color, builder gel, or nail art application.
Apply a thin, uniform coat of VER Crystal Top Coat, making sure to cap the free edge to prevent tip wear.
Cure under an LED lamp for 60 seconds (or UV lamp for 120 seconds).
Allow the nails to cool for 30–60 seconds after curing to achieve maximum glass-shine hardness before touching.
Ver Diamond Top Coat
$7.00Elevate nail strength and radiance with the ultimate scratch-proof sealant: VER Diamond Top Coat. Engineered with a reinforced polymer matrix for busy nail salons and at-home artists across Lebanon, this high-performance no-wipe top coat forms an ultra-hard, shock-resistant armor over gel polish, builder gel, acrylic, and chrome nail art, preserving a flawless mirror finish for up to 4+ weeks.
Key Features:
Reinforced Diamond Hardness: Delivers maximum defense against daily friction, surface abrasions, micro-scratches, and dulling.
No-Wipe, High-Tension Formula: Cures 100% dry and smooth without a tacky dispersion layer—no cleanser wipes needed.
Non-Shrinking & Leveling: Medium viscosity formula self-levels seamlessly to correct surface dips without shrinking at the tips.
Optical Clarity & Stain Barrier: Repels dye transfers (cosmetics, hair products, denim) while enhancing color depth and chrome reflections.
How to Use:
Complete your gel color application, nail art, or chrome powder buffing.
Brush on a thin, even layer of VER Diamond Top Coat, capping the free edge securely to seal the manicure.
Cure under a UV/LED lamp for 60 seconds (or UV lamp for 120 seconds).
Let the nails cool and set for 45–60 seconds before applying cuticle oil to allow the diamond polymer matrix to reach maximum hardness.
Ver Glass Top Coat
$7.00Deliver a liquid glass, high-refraction shine with VER Glass Top Coat. Specially crafted for beauty salons and nail technicians across Lebanon, this crystal-pure no-wipe top coat creates a deep, wet-look reflection that enhances chrome pigments, jelly gels, magnetic cat-eye effects, and 3D nail art with optical clarity.
Key Features:
Ultra-Translucent Glass Shine: Maximizes light refraction to give natural nails and gel enhancements a liquid-glass, 3D reflection.
No-Wipe Gloss Formula: Cures completely dry without an inhibition or sticky residue layer—no cleansing alcohol needed.
Zero Color Distortion: Pure transparent formula will not cloud, alter dark gel pigments, or dull vibrant cat-eye and metallic effects.
Smooth Self-Balancing Flow: Effortlessly fills in minor surface textures, brush marks, and micro-glitter ridges into a smooth dome.
How to Use:
Complete your gel color, jelly polish, chrome buffing, or nail art design.
Apply a smooth, medium-thin layer of VER Glass Top Coat, making sure to cap the free edge of the nail.
Allow 5–10 seconds for the gel to self-level into a smooth glass reflection.
Cure under an LED lamp for 60 seconds (or UV lamp for 120 seconds).
Allow the nails to cool down for 30 seconds before applying cuticle oils or hand creams.
Ver Glue Gel
$7.00Lock full-cover soft gel tips, press-ons, rhinestones, and 3D charms in place with VER Glue Gel. Specially engineered for professional nail technicians and salons across Lebanon, this high-viscosity, non-flowing adhesive gel provides an unbreakable bond without air bubbles, messy spills, or accidental skin flooding before curing.
Key Features:
High-Viscosity / Non-Floating Formula: Stays firmly in place without running into cuticles or shifting while positioning soft gel tips or large crystals.
Bubble-Free Adhesion: Fills the gap seamlessly between the natural nail curve and artificial tips, eliminating air pockets that cause premature pop-offs.
Zero Heat Spike Formulation: Gentle curing comfort under UV/LED light without intense burning sensations on sensitive nail beds.
Strong Shock Absorption: Cures into a flexible yet rock-solid layer that withstands daily impacts and pressure for 4+ weeks.
How to Use:
Prep the natural nail (buff, cleanse, and apply VER pH Bond and Primer).
Etch/buff the inner contact area of the soft gel tip.
Scoop or apply a suitable bead of VER Glue Gel onto the base of the nail tip (or directly onto the nail for rhinestone placement).
Press the tip onto the nail at a 45-degree angle from cuticle to free edge, gently rolling down to push out any air.
Flash cure under a mini LED lamp for 10–15 seconds while holding in place, then cure fully under a standard UV/LED lamp for 60 seconds.
Ver PH Bond
$5.00Achieve long-lasting, lifting-free manicures with VER pH Bond. Engineered for professional nail technicians and beauty salons across Lebanon, this essential prep solution instantly removes surface oils, balances the natural nail plate's pH level, and dehydrates moisture layers before gel, acrylic, polygel, or regular nail enhancements.
Key Features:
Instant Dehydration & Balancing: Strips away excess moisture and sebum without damaging the natural keratin layer.
Fast Air-Dry Formula: Evaporates completely within 3–5 seconds—no UV/LED lamp curing needed.
Universal Compatibility: Works seamlessly with all base coats, acid-free primers, builder gels, acrylic systems, and dipping powders.
Non-Damaging & Lightweight: Gentle on fragile, oily, or natural nails.
How to Use:
Prep the nail: Push back cuticles and gently buff the nail surface to remove shine.
Cleanse away all dust with a lint-free wipe soaked in nail cleanser or alcohol.
Brush a thin, even coat of VER pH Bond across the natural nail plate.
Allow it to air-dry completely (3–5 seconds) until a clean, chalky-matte finish appears.
Follow immediately with your preferred primer (if required) and gel base coat.
Ver Primer
$5.00Create an unbreakable bond between the natural nail and any enhancement system with VER Acid-Free Primer. Specially formulated for professional salons and nail enthusiasts across Lebanon, this gentle yet ultra-sticky primer acts as a double-sided tape, anchoring gel polish, builder gel, acrylic, and polygel directly to the nail plate to prevent lifting and air pockets.
Key Features:
Acid-Free & Gentle Formulation: Non-corrosive, non-burning formula that preserves the natural nail's integrity without irritating delicate cuticles or nail beds.
Double-Sided Sticky Adhesion: Dries down to a slightly tacky microscopic adhesive layer that fuses base layers directly to the keratin plate.
Fast Air-Dry Action: Sets completely within 30–60 seconds in the air—no UV/LED lamp required.
Universal Enhancement Anchor: Compatible with all soak-off base coats, hard builder gels, dip powders, acrylic liquid & powder, and soft gel tips.
How to Use:
Prep the nail plate: push cuticles, lightly buff the surface, and cleanse off dust.
Apply a thin layer of VER pH Bond and let it air-dry for 3–5 seconds.
Wipe the excess product from the brush and apply a very thin, sparing coat of VER Acid-Free Primer directly over the natural nail plate (avoid flooding the skin).
Allow it to air-dry for 30–60 seconds (it will remain slightly tacky to the touch).
Follow immediately with your chosen gel base coat or builder gel system and cure.
Ver Repair Fiber Base Gel
$7.00Rescue weak, brittle, thin, and damaged nails with VER Repair Fiber Base Gel. Infused with micro-fiberglass particles and synthetic nylon fibers, this salon-grade base coat creates a flexible, mesh-like shield over the natural nail. It acts as both a reparative reinforcement and a high-adhesion base coat, smoothing ridges, repairing cracks, and preventing chipping for up to 4+ weeks.
Key Features:
Visible Micro-Fiber Infusion: Contains fine synthetic fiberglass particles that interlock during curing to reinforce broken, bending, or splitting nails.
Self-Leveling & Ridge-Filling: Medium-thick viscosity easily smooths out irregular, ridged, or bumpy nail plates into a clean apex.
Universal Multi-Use: Functions as a strengthening base coat, a minor extension/repair gel (using forms), and a standalone natural overlay.
Flexible & High Adhesion: Absorbs everyday impact without cracking or causing painful lifting from the nail bed.
How to Use:
Prep nails thoroughly: push back cuticles, buff the shine, and apply VER pH Bond and Primer.
Apply a thin, even layer of VER Repair Fiber Base Gel over the nail surface to anchor the fibers.
(Optional for damaged/uneven nails) Place a small bead in the center to build a smooth apex and self-level.
Cure under an LED lamp for 60 seconds (or UV lamp for 120 seconds).
Wipe off any sticky residue if shaping is needed, or proceed directly with your favorite colored gel polish and top coat.